JET L Series Self-priming JET PUMP

 
PERFORMANCE AND WORKING LIMITS

Capacity up to 55 l/min (3.3m3/h)
Total Head up to 50m
Max. Suction lift up to 8m
Max. Pressure 10 bar
Fluid temperature up to +50℃.
Max. ambient temperature up to +40℃.

    JET PUMP WORKING PRINCIPLE: The most remarkable character of JET pump is a Venturi system consisted of a tube and a nozzle housed in its pump body. With a large water tank in the front of the pump, JET L achieved self-priming using the Venturi system. The total delivery produced by its centrifugal impeller is sent through the nozzle in Venturi system, this flow with a tremendous speed lead the water induction chamber and generates the necessary vacuum to self-prime the pump.
    These pumps are suitable for pumping clean water and chemically non-aggressive fluid. They are extremely reliable, economical and simple to use, finding many uses in domestic applications and the automatic distribution of water from small and medium-sized surge tanks, for watering gardens etc. It is always advisable to install a foot value or a retention valve on the suction opening.
    These pumps should be installed in a covered area, protected against the weather.